Rotary Drills
Removal
8.3 Removing the motor housing
8.3.1 Removing the gearbox housing
Steps that must be completed:
-
Removing the carbon brushes
Tools:
-
PH2 cross-tip screwdriver
1
C-SC_CSSM
2
Version 1.0
All rights reserved by FEIN, especially in case of property rights applications.
FEIN retains all rights of disposal, such as copying and circulation.
1.
Unscrew the two screws (1).
2.
Repeat step 1 on the opposite side of the machine.
3.
Remove the gearbox housing (2).
01.01.2019
Page 14 of 47