Removing The Armature - Fein BOZ 32-4M Repair Instructions

Rotary Drills
Removal

8.3.8 Removing the armature

Steps that must be completed:
- Removing the carbon brushes
- Removing the gearbox housing
- Removing the intermediate gear box
- Removing the intermediate gear box
Tools:
- Circlip pliers
- Arbor press
- Drawing-off socket cap
- Chuck cone, dia. 26 mm
C-SC_CSSM
1
2
3
Version 1.0
All rights reserved by FEIN, especially in case of property rights applications.
FEIN retains all rights of disposal, such as copying and circulation.
1. Remove the bearing bush (1).
2. Remove the ring magnet with the ball bearing (2).
3. Remove the disc (3).
01.01.2019 Page 21 of 47