Rotary Drills
Removal
8.3.2 Removing the electronics
Steps that must be completed:
-
Removing the carbon brushes
Tools:
-
Long-nosed pliers
-
PH2 cross-tip screwdriver
-
Torx T20
1
4
3
C-SC_CSSM
2
5
6
Version 1.0
All rights reserved by FEIN, especially in case of property rights applications.
FEIN retains all rights of disposal, such as copying and circulation.
1.
Remove all plug connections from the electronics.
2.
Unscrew the two screws (1).
3.
Remove the electronics (2).
4.
Unscrew the screw (3).
5.
Remove the cable (4).
6.
Unscrew the two screws (5).
7.
Remove the brush holder (6).
8.
Repeat steps 4 to 7 on the opposite side of the machine.
01.01.2019
Page 15 of 47