Rotary Drills
Removal
8.3.5 Removing the stator
Steps that must be completed:
-
Removing the carbon brushes
-
Removing the electronics
Tools:
-
PH2 cross-tip screwdriver
-
Soldering station
5
C-SC_CSSM
1
4
2
3
Version 1.0
All rights reserved by FEIN, especially in case of property rights applications.
FEIN retains all rights of disposal, such as copying and circulation.
1.
Remove the air guide ring (1).
2.
Remove the pressure piece (2).
3.
Remove the stator (3).
4.
Remove the connecting cable (4) from the motor housing.
5.
Unsolder the cables (5).
01.01.2019
Page 18 of 47