Rotary Drills
Fitting
9.2.5 Fitting the electronic components
Steps that must be completed:
-
Fitting the stator
Tools:
-
Slotted screwdriver
2
1
4
6
5
C-SC_CSSM
3
Version 1.0
All rights reserved by FEIN, especially in case of property rights applications.
FEIN retains all rights of disposal, such as copying and circulation.
1.
Position the bolt (1).
2.
Connect the cables to the toggle switch (2) as shown in
the connection diagram.
3.
Screw the six screws into the toggle switch (2).
4.
Connect the cables as shown in the connection diagram.
5.
Position the capacitor (3).
6.
Screw in the four screws (4).
7.
Position all of the electronic components in the handle half
shell (5).
8.
Position the two pressure pieces (6).
01.01.2019
Page 39 of 47