Removing The Electronic Components - Fein BOZ 32-4M Repair Instructions

Rotary Drills
Removal

8.3.4 Removing the electronic components

Steps that must be completed:
- Removing the handle
Tools:
- Slotted screwdriver
1
2
3
5
6
C-SC_CSSM
4
Version 1.0
All rights reserved by FEIN, especially in case of property rights applications.
FEIN retains all rights of disposal, such as copying and circulation.
1. Remove the two pressure pieces (1).
2. Remove all electronic components from the handle half
shell (2).
3. Unscrew the four screws (3).
4. Remove the capacitor (4).
5. Remove all of the cables.
6. Unscrew all six screws from the toggle switch (5).
7. Remove all of the cables from the toggle switch (5).
8. Remove the bolt (6).
01.01.2019 Page 17 of 47