Rotary Drills
Fitting
9.2.6 Fitting the network cable
Steps that must be completed:
-
Fitting the stator
Tools:
-
PH2 cross-tip screwdriver
2
1
3
C-SC_CSSM
4
Version 1.0
All rights reserved by FEIN, especially in case of property rights applications.
FEIN retains all rights of disposal, such as copying and circulation.
1.
Position the cable grommet (1).
2.
Position the cable (2).
3.
Position the cable clamping piece (3).
4.
Screw in the two screws (4).
01.01.2019
Page 40 of 47