Configuring The Valve Terminal/Valve Sensor Terminal - Festo VIFB-02- Series Manual

VIFB1 – 02

Configuring the valve terminal/valve sensor terminal

Green LED
Plug for
field bus
cables
Board 1
Screening
Board 2
Fig. 4/13: Connections, operation and display elements of field bus
node
> IFB1-02_BES_V_018474g1_1996-04N - Restored Document - 2011-12-15 <
9604
4. Installation
There are two PC boards in the field bus node.
Board 1 contains an LED and a plug for the field
bus cables; board 2 contains
switch for setting the configuration.
an LED and a
Red LED
Address
selector switch
DIL switch
4-23