Inputs - Festo VIFB-02- Series Manual

VIFB1 – 02
Common fuse for
operating voltage
supply
to sensors
(4 A, slow blowing)
Fig. 4/32: Inputs on the valve sensor terminal
> IFB1-02_BES_V_018474g1_1996-04N - Restored Document - 2011-12-15 <
9604
4. Installation

Inputs

There are two inputs for each valve location on
the valve-sensor coupling unit of the valve sen-
sor terminal. There are two further inputs above
the field bus node. The inputs have positive logic
(PNP inputs).
I0.00 I0.02
I0.01 I0.03
PNP inputs
I0.04 I0.06 I0.08
I0.05 I0.07 I0.09
4-43