Manufacturer-Specific Features; Festo - Festo VIFB-02- Series Manual

VIFB1 - 02
0.00
0.00
0.01
0.01
BUS
Program:
IF
THEN SET
IF
THEN SET
Fig. 5/15: Example – Addressing a valve sensor terminal with more
than 6 valve locations
> IFB1-02_BES_V_018474g1_1996-04N - Restored Document - 2011-12-15 <
9604
5. Commissioning

Manufacturer-specific features

Festo

Example:
Addressing the inputs/outputs of a valve sensor
terminal with more than 6 valve locations.
Processor system address E.CFA:
Field bus address of the terminal:
0.02 0.04 0.06 0.08
0.05 0.07 0.09
0.03
0.02 0.04 0.06 0.08
0.03
0.05 0.07 0.09
I416.0.3 "Input
O416.0.4 "Output
I416.1.1 "Input
O416.1.5 "Output
Further details on addressing and programming
are to be found in the PLC manual of the control
system (e.g. Festo system manual FPC 405,
Chapter 7).
0.10 0.12 0.14 1.00
1.01
0.11
0.13 0.15
0.10 0.12 0.14 1.00
0.11 0.13 0.15 1.01
I0.03
O0.04 (2nd. valve, upper coil)
I1.01
O1.05 (10th. valve, lower coil)
4
16
1.02 1.04
1.03 1.05
1.02 1.04
1.03 1.05
5-15