Connecting The Valves - Festo VIFB-02- Series Manual

VIFB1 – 02
4-10
> IFB1-02_BES_V_018474g1_1996-04N - Restored Document - 2011-12-15 <
4. Installation

Connecting the valves

PLEASE NOTE
The non-reserved or free valve locations
should be protected with a cover plate.
If one of the fitted valves is not used, con-
nections 2 and 4 as well as 14 and, if neces-
sary, 12 must be covered with blind plugs.
The seals used on connections 2 and 4
should be of aluminium.
Remove the lupolen plugs and fit the screw con-
nectors with the appropriate seals as indicated
in the following tables:
Fig. 4/5: Pin assignment of solenoid valve
Fig. 4/6: Pin assignment of solenoid pulse valve
and solenoid mid-position valve
The hoses should then be fitted into place.
PLEASE NOTE
The work connections 2 and 4 are situated
in different positions on the various types of
valves (see also next page).
9604