Connection Block - Festo VIFB-02- Series Manual

VIFB1 – 02
FITTING THE VALVE TERMINAL/VALVE SENSOR TERMINAL
> IFB1-02_BES_V_018474g1_1996-04N - Restored Document - 2011-12-15 <
9604
4. Installation
Before fitting the valve terminal/valve sensor ter-
minal please see that there is sufficient space to
the left and/or right of the connection block for
fitting the hoses and, if necessary, the silencers.
There are 4 through holes on the right and left-
hand edges of the connection block for fastening
the valve terminal/valve sensor terminal (see fol-
lowing diagram).
POWER
BUS
BUS
1
1 Mounting holes for M6 hexagon head bolts
Fig. 4/1: Through holes for mounting
1
4-3