Table of Contents
Advertisement
Metal Core Drilling
Disassembly
Removing the intermediate gear box
Steps that must be completed:
-
Removing the carbon brushes
-
Removing the drill motor
Tool(s):
-
Torx T20
-
Socket head wrench, 5 mm
-
Plastic hammer
1
3
4
C-SC_CSSM
1.
2.
2
3.
4.
Version 1.0
All rights reserved by FEIN, especially in case of property rights applications.
FEIN retains all rights of disposal, such as copying and circulation.
Unscrew the four screws (1).
Remove the motor (2).
Unscrew the four screws with washers (3).
Remove the intermediate gear box (4).
01.04.2021
34130550060
Printed in Germany
Page 18 of 92
Advertisement
Table of Contents
