Kollmorgen
1
General
1.1
About this manual
This manual describes the S70101-S72401 series of digital servo amplifiers (standard
version: 1.5A ...24A rated current, single channel STO).
A more detailed description of the expansion cards that are currently available and the
digital connection to automation systems can be found, together with our application
notes, in Acrobat-Reader format on the accompanying CD-ROM (system requirements:
WINDOWS, Internet Browser, Acrobat Reader) in different languages.
Technical data and dimensional drawings of accessories such as cables, brake resistors,
mains supplies, etc., can be found in the accessories manual.
This
copy of the documentation is available from us at extra cost.
More background information can be found in our "Product WIKI", available at
www.wiki-kollmorgen.eu.
1.2
Target group
This manual addresses personnel with the following qualifications:
Transport : only by personnel with knowledge of handling electrostatically sensitive
Unpacking: only by electrically qualified personnel.
Installation : only by electrically qualified personnel.
Setup :
The qualified personnel must know and observe the following standards:
During operation there are deadly hazards, with the possibility of death, severe
injury or material damage. The operator must ensure that the safety instructions in
this manual are followed. The operator must ensure that all personnel responsible
for working with the servo amplifier have read and understood the product manual.
1.3
Hints for the online edition (PDF format)
Bookmarks:
Table of contents and index are active bookmarks.
Table of contents and index in the text:
The lines are active cross references. Click on the desired line and the appropriate page
is accessed.
Page/chapter numbers in the text:
Page/chapter numbers with cross references are active. Click at the page/chapter num-
ber to reach the indicated target.
S701...S724 (single channel STO) Instruction Manual
documentation can be printed out
components.
only by qualified personnel with extensive knowledge of electrical
engineering and drive technology
IEC 60364 and IEC 60664
national accident prevention regulations
12/2010a
on any standard commercial printer. A printed
General
7