Festo CPV-DI01 Manual page 75

2. Commissioning PROFIBUS-DP
Icons
Festo P.BE-CP-DI01-EN en 0007a
2. There are Bitmap files with icons for Festo valve ter-
minals on the CD ROM to facilitate configuration.
Copy the files PB_DICP*.BMP into directory
\STEP7\S7DATA\NSBMP on your PC/programmer.
The Bitmaps can either be:
S
copied into the above-mentioned directory or
S
loaded via menu item "Extras" – "Install new GSD" -
data type "Bitmap" in HW Config
3. Edit the mask "Properties of the DP Master".
– - Bus profile
– - Baud rate
4. Activate the DP Master in the rack.
Further information (directories, etc.) can be found in the file
"Readme" in the main directory of the CD ROM.
2-21