Festo CPV-DI01 Manual page 180

9. Diagnosis with the Moeller SUCOnet K
Bit no.
Diagnostic
information
Signal status
Meaning
*) As from software version 1.1 always 0, up to software version 1.1 always 1
Fig. 9/7: Structure of diagnostic byte SUCOnet K
9-8
The diagram below shows the structure of the diagnostic byte
of the CP system.
7 6 5 4
— V V V
val tol sen
0 0/1 0/1 0/1
Signal status "0": no error
Signal status "1": error
Example:
Load diagnostic byte
Master: PS4
Station number: 2 (= unit 1)
Program extract:
%RDB1.1.0.4
Fig. 9/8: Program example with SUCOnet K
Please refer to the PLC manual for your controller for further
information.
3 2 1
V Short ACP
out
circuit/
overload
0/1 0/1 0/1
Festo P.BE-CP-DI01-EN en 0007a
0
—
0*