Festo CPV-DI01 Manual page 26

1. Installation
1-12
The following pages contain a summary of the settings for the
station numbers. You can use the tables for all protocols with
which the valve terminal can be used.
Please note
With protocols ABB CS31 and Festo field bus, the DIL
switch elements 1...6 suffice for setting the station
number.
With protocol ABB CS31, switch element 7 must be set to
OFF.
With the Festo field bus, switch elements 7 and 8 are used
for setting the baud rate.
Festo P.BE-CP-DI01-EN en 0007a