Festo CPV-DI01 Manual page 71

2. Commissioning PROFIBUS-DP
Fig. 2/8: Configuration with COM PROFIBUS 5.0
Festo P.BE-CP-DI01-EN en 0007a
The program has already automatically entered the DP
identifier for the 16 outputs of the CPV valve terminal in
this mask.
2. Enter the extensions to your CP system in lines 2 and 3 in
the column "Identifier" (summary see Fig. 2/3).
Alternative entry of the system extension in the mask
"Module selection"
1. Mark the next unused field in the column "Module" and
click on the button "Module...".
The mask "Module selection" will appear (Fig. 2/9).
2. Mark the entry which corresponds to your system exten-
sion and confirm with "Apply".
3. Repeat step 2 if you wish to include further modules in
the system extension.
2-17