Festo CPV-DI01 Manual page 24

1. Installation
1-10
Setting the station number
You can set the field bus station number with the 8-position
DIL switch.
Please note
Station numbers may only be assigned once per field bus
line.
The following station numbers are permitted:
Protocol Address
designation
PROFIBUS-DP PROFIBUS address
Festo field bus field bus address
ABB CS31 CS31 module
address
Moeller SUCOnet K –
Recommendation:
Assign the field bus addresses in ascending order. Assign the
field bus addresses to suit the machine structure of your sys-
tem.
3
Permitted station
numbers
0; ...; 125
1; ...; 63
0; ...; 60
2; ...; 98
Festo P.BE-CP-DI01-EN en 0007a