Festo CPV-DI01 Manual page 53

1. Installation
Festo P.BE-CP-DI01-EN en 0007a
Caution
The maximum length of line between the CPV Direct and
the last CP module must not exceed 10 m.
The CP connecting cables must have special electrical
characteristics. Therefore, always use Festo CP connecting
cables.
You can obtain ready-to-use cables from Festo. These are
available in various lengths and designs. A summary can be
found in Appendix A.
Seal the unused CP connections on your CP system with the
appropriate seal provided. In this way, you will comply with
protection class IP65.
The following diagram shows some possible extensions.
1-39