Festo CPV-DI01 Manual page 23

1. Installation
Extension to the CP system
CPV Direct
without extension
CPV valve terminal
with extension with:
– a CP input module
CPV valve terminal
with extension with:
– a CP valve terminal
or
– a CP output module
CPV valve terminal
with extension with:
– a CP valve terminal/CP output
module
and
– a CP input module
Fig. 1/5: Setting: extension of the CP system with 4-position DIL switch
Festo P.BE-CP-DI01-EN en 0007a
Setting the extension to the CP system
Further CP modules can be connected to the CPV Direct. You
can set the extension to the CP system with switch elements 3
and 4 of the 4-position DIL switch as shown in the diagram
below.
Number of inputs/outputs
16 outputs
16 outputs
16 outputs
+
16 outputs
16 outputs
+
16 outputs
Please note
Depending on the extension set, the CP system occupies a
different number of inputs and outputs or station
numbers. Further information can be found in chapter 1.8.
2
Setting the DIL
switches
+
16 inputs
+
16 inputs
1-9