Load Ribbon - Intermec PM43 User Manual

Load Ribbon

PM43 and PM43c Mid-Range Printer User Manual
5 Close the media cover.
6 Press the Print button to advance the media. If you are switching
to a new type of media, you need to calibrate the sensors on the
printer.
Thermal transfer printing provides a durable printout that is less
vulnerable to chemicals, heat, and sunlight than direct thermal
printing. Make sure you select a ribbon type that matches the media
you are using and that you configure the printer for thermal transfer
media.
The printer supports thermal transfer ribbon rolls with the ink-coated
side facing either inward or outward. To determine which type of
ribbon you have, use a pen or other sharp object to scratch through the
ribbon against a piece of paper. If you see a mark on the paper, your
ribbon is wound ink out.
Determining Whether Your Ribbon is Wound Ink In or Ink Out
1 Open the media cover.
2 Turn the printhead lift lever counterclockwise to raise the
printhead.
Chapter 2 — Set Up the Printer
31