Manual Release Key Socket <11 - Physiomed IONOSON-Basic Operating Instructions Manual

2 Controls and Indicators
Replacing the ultrasonic transducer during treatment will not affect the selected mode of treatment. The
dose, however, will automatically be turned down to zero and has to be increased again when continuing
the treatment.
Automatic Coupling Confirmation
Both transducer and instrument have an optical coupling confirmation, which guarantees
constant and efficient treatment. If the coupling to the tissue of the patient is not efficient
enough, the light at the transducer will start flashing. You can choose between counting only
the effective treatment time or running the timer independently of the coupling (refer to
sic Settings
Ultrasonic Transducer
Important
The transducer contains a fragile ceramic piezo-resonator. Avoid shocks to the surface and
take special care that the transducer is not dropped. Hard knocks can alter its physical charac-
teristics!
2.10 Manual Release Key Socket <11>
The manual release key can be used as a therapy pause button for all other current modes. When pressing
the release key, the current is switched off immediately.
NOTICE
You can turn up the current only after setting the Intensity Control Channel 1 <3> or In-
tensity Control Channel 2 <4>. The therapy time is interrupted as long as the instrument is
standing by.
10
on page 66).
The ultrasonic transducers (2.5 or 5 cm
MHz and 3 MHz. The transducers are automatically calibrated after
connecting or switching on the instrument.
The transducers are watertight and can be used for underwater treat-
ment.
The Manual Release Key Socket <11> at the front of the instrument serves to
connect the manual release key for intentional exercises or for a therapy pause. The
use of a manual release key may be appropriate when applying the current modes
FaS, T/R and KOTS.
PHYSIOMED ELEKTROMEDIZIN AG
Ba-
2
) work with the frequencies 1
IONOSON-Basic