Table of Contents
Advertisement
3 Overview of Current Modes
How to Adjust the Pulse Time
(1)
Click on the Ti symbol using the Data Selector <2>. The symbol starts flashing.
(2)
Turn the Data Selector <2>, to adjust the desired pulse time and confirm by pressing it.
NOTICE
You can only extend the pulse time Ti if the intensity in both channels is zero. If you ex-
tend the pulse time, the current is experienced by the patient as more intense.
How to Adjust the Selective Frequency
(1)
Click on the symbol
(2)
Turn the Data Selector <2> to the right until the SELECTIVE symbol is displayed.
(3)
Turn the Data Selector <2> and turn it to the right by one position.
(4)
Press the Data Selector <2>. The arrow symbol starts flashing.
(5)
Press the Data Selector <2> and adjust the desired frequency (the desired frequency is displayed
next to the f symbol) and press it for confirmation.
NOTICE
With the burst function (burst frequency between 1 and 10 Hz) activated simultan-
eously, you can only choose a selective frequency between 70 and 200 Hz or the fre-
quency band 70 - 150 Hz. The frequency band 1 - 150 Hz is not available.
3.3.10 (MENS) Electric Nerve Stimulation with Microcurrent
Definition
Application
Menu for Current Mode MENS
24
by means of the Data Selector <2>. The symbol starts flashing.
Electric nerve stimulation with microcurrent
•
Pain treatment (especially for chronic neuralgia and myalgia)
•
Trophic enhancement
•
Improvement of healing and regeneration
PHYSIOMED ELEKTROMEDIZIN AG
IONOSON-Basic
Hide quick links:
Advertisement
Table of Contents
