Pain Therapy, Hyperaemisation, Detonisation - Physiomed IONOSON-Basic Operating Instructions Manual

5 Therapy with Stimulation Current
Socket <11> on the front of the instrument and hand the manual release key to the patient.
(8) Slowly turn up the intensity of channel I with the Intensity Control Channel I <3>. The therapy
time elapses.
CAUTION
Make sure you do not touch the electrodes when the current is turned up!
(9) After treatment, an acoustic signal will be issued. The intensity is turned down to zero automatically.
Remove the electrodes and rinse the viscose covers thoroughly.

5.5.3 Pain Therapy, Hyperaemisation, Detonisation

Treatment with stochastic current
The following current modes can be used for these modes of therapy: G, GMC, DF, MF, CP, LP, UR, HV,
TENS, MENS, IG 30, IG 50, FM and STOCH.
You find a detailed overview about the parameters adjustable under:
• Parameters for Current Mode G
• Parameters for Current Mode GMC
• Parameters for Current Type DF
• Parameters for Current Mode MF
• Parameters for Current Mode CP
• Parameters for Current Mode LP
• Parameters for Current Mode UR
• Parameters for Current Mode HV
• Parameters for Current Mode TENS
• Parameters for Current Mode MENS
• Parameters for Current Mode IG30
• Parameters for Current Mode IG50
• Parameters for Current Type FM
• Parameters for Current Mode STOCH
46
on page 16
on page 17
on page 17
on page 18
on page 19
on page 20
on page 21
on page 22
on page 23
on page 25
on page 26
on page 27
on page 28
on page 29
PHYSIOMED ELEKTROMEDIZIN AG
IONOSON-Basic