Table of Contents
Advertisement
Controls and Indicators
2.1.9 Indications Menu <9>
2.1.10 Setup Menu <10>
2.1.11 Transducer Connectors <11>
Ultrasonic Transducers
Automatic Coupling Confirmation
There is an optical coupling confirmation at the transducers which goes out as soon
as there is efficient coupling. A further optical coupling confirmation is located in
the upper status bar <2>. It enables you to counter-check with the optical cou-
pling confirmation at the transducer. Just as the acoustic coupling confirmation, it
may be activated in the basic settings.
Warning The transducers contain fragile ceramic piezo-resonators. Avoid shocks
to the surface and take special care that they are not dropped. Han-
dling malpractices can change the characteristics of the resonator.
2.1.12 SIM Socket <12>
6
The indications menu <9> enables you to access therapy via an
alphabetically sorted indications menu, with automatic call of a
treatment program featuring a suggested dose. More informa-
tion can be found on page 16.
In the setup menu <10>, the basic settings may be selected.
More information can be found on page 20.
Through the transducer connectors <11> the
ultrasonic transducers are connected to the
instrument. The microprocessor recognizes
which transducer has been connected to which
of the two connectors. The transducers are
automatically calibrated after connecting the
transducer(s) and/or switching on the instru-
ment.
The ultrasonic transducers (2.5 cm
2
cm
) work with the frequencies 1 MHz and 3
MHz. The transducers are automatically cali-
brated after connecting and/ or switching on
the instrument.
The transducers offer the highest possible safety
for ultrasound output. They are watertight and
can be used for underwater treatment.
The SIM socket <12> serves for connecting the unit with a
stimulation current unit
Simultaneous Therapy
therapy (cf.
for simultaneous
PHYSIOMED-Expert
on page 11).
2
and 5
PHYSIOSON-Expert
Hide quick links:
Advertisement
Table of Contents
