Table of Contents
Advertisement
PHYSIOMED ELEKTROMEDIZIN AG
4.1.2 Economy Mode
In the battery operation mode, the instrument automatically switches over to the economy mode in the
start menu to save power. The Display <1> is no longer illuminated.
Turning the Data Selector <2> will re-activate the illumination.
4.2 Start-up of the Instrument
Before you can perform the first treatment with the IONOSON-Basic, you have to start the instrument up
accordingly.
How to Start up the Instrument
(1)
Make sure that the instrument is switched off (the switch on the Mains Module <7> as well as the
Power Switch <8> are on position 0).
(2)
Firmly plug the supplied mains cable in the Mains Module <7> on the rear face and connect it with
the power socket. You get a safe connection using a three-pin plug with earth conductor resistance.
(3)
Switch the switch at the Mains Module <7> on and charge the battery (refer to
Battery
on page 38).
(4)
Plug the patient lead in the Patient Lead Connector <9>.
(5)
Switch on the instrument with the Power Switch <8>.
The instrument will conduct an automatic function check which tests all functions and start values.
An acoustic signal sounds.
The instrument is now ready. You are now in the initial menu.
CAUTION
Make sure you do not touch the electrodes when the current is turned up!
4.3 Function Check
If you are not sure if your IONOSON-Basic is working properly, you can perform a self-test.
How to Perform an Automatic Self-Test
(1)
Use the Power Switch <8> to switch the instrument off and on again.
The instrument will execute an automatic function check which tests all functions and start values.
An acoustic signal sounds.
The instrument is ready now. You are now in the initial menu.
4.4 Monitoring Notes
If a problem is detected during the selftest or during operation, a corresponding message is displayed in
the Display <1>. A monitoring note will be shown, e.g. <MONITORING NOTE 10> Refer to Operating
Instructions!. These notes simplify localizing and eliminating problems. Operation of the instrument will
be interrupted and the stimulation current output is switched off.
IONOSON-Basic
4 Operation of the instrument
How to Charge the
39
Hide quick links:
Advertisement
Table of Contents
