Reinforce Wrap Setup - Pro Mach ORION Sentry HP Manual

Orion
Revision 3.1
21 May 2020

Reinforce Wrap Setup

Figure 3 - 22
The Reinforce Setup
Screen
Table 3-18. The Reinforce Wraps Screen Button Descriptions
STATE 1
REINFORCE WRAPS
This is the Reinforce Wraps Setting Screen. This screen allows the user to set the number
of reinforce wraps that are applied when the reinforce button on the Run Screen is pressed.
Press this button to set the number of reinforce wraps that are applied when the
enable reinforce wraps button is pressed on the Run screen.
Sentry HP/ LP Flex Stretchwrapper
DESCRIPTION
Machine Manual
System Operation
Page 3-27