Daikin Altherma 3 GEO Series Installer's Reference Manual page 23

EGSAH/X06+10UDA9W
Daikin Altherma 3 GEO
4P598592-1A – 2019.12
For installation instructions, see the installation manual of the heat pump
convectors, and the addendum book for optional equipment.
Room thermostat (EKRTWA, EKRTR1)
You can connect an optional room thermostat to the indoor unit. This thermostat
can either be wired (EKRTWA) or wireless (EKRTR1).
For installation instructions, see the installation manual of the room thermostat
and addendum book for optional equipment.
Remote sensor for wireless thermostat (EKRTETS)
You can use a wireless indoor temperature sensor (EKRTETS) only in combination
with the wireless thermostat (EKRTR1).
For installation instructions, see the installation manual of the room thermostat
and addendum book for optional equipment.
Brine filling kit (KGSFILL2)
Brine filling valve kit for flushing, filling, and draining the brine circuit.
Current sensor (EKCSENS)
Current sensor for power limitation. For installation instructions, see the
installation manual of the current sensor.
Hydro module (EKGSHYDMOD)
Hydro module replacement.
For installation instructions, see the installation manual of the hydro module.
Power cable with connector for Germany (EKGSPOWCAB)
Power cable for split power supply layout, needed for installations in Germany.
For installation instructions, see the installation manual of the power cable.
Multi-zoning base unit and wired thermostats (EKWUFHTA1V3, EKWCTRDI1V3,
EKWCTRAN1V3)
Multi-zoning base unit (EKWUFHTA1V3) and thermostats for multi zone control of
underfloor heating and radiators. Both digital (EKWCTRDI1V3) and analog
(EKWCTRAN1V3) wired thermostat options are available.
For more information, see the installation manual of the multi-zoning base unit and
the applicable thermostat.
4 About the units and options
|
Installer reference guide
23