Daikin Altherma 3 GEO Series Installer's Reference Manual page 127

EGSAH/X06+10UDA9W
Daikin Altherma 3 GEO
4P598592-1A – 2019.12
LED Error behavior
Heartbeat LED NOT blinking
Network LED flashing
Indoor unit communication LED
flashing
Smart Grid LED flashing for
more than 30 minutes.
INFORMATION
▪
The DIP switch is used to configure the system. For more information, see
"9.4 Configuration – LAN
▪
When the LAN adapter performs a Smart Grid compatibility check, LD4 flashes.
This is NOT erroneous behaviour. After a successful check, LD4 will either stay ON
or go OFF. When it keeps flashing for more than 30 minutes, the compatibility
check failed, and NO Smart Grid operation is possible.
For a complete description of the status LEDs, check
4
adapter" [ 100].
Description
No normal operation.
Try resetting the LAN adapter or contact
your dealer.
Communication problem.
Check the network connection.
Communication problem with the
indoor unit.
Smart Grid compatibility problem.
Try resetting the LAN adapter or contact
your dealer.
4
adapter" [ 112].
9 LAN adapter
|
"9.1 About the LAN
Installer reference guide
127