Daikin Altherma 3 GEO Series Installer's Reference Manual page 119

Via the DIP switch
EGSAH/X06+10UDA9W
Daikin Altherma 3 GEO
4P598592-1A – 2019.12
Network settings
Information
DHCP active
Automatic
Manually
Static IP address
Subnet Mask
Default gateway
Primary DNS
Secondary DNS
INFORMATION
By default "DHCP active" is set to "Automatic" and IP settings are configured
automatically and dynamically by way of the DHCP protocol. When setting "DHCP
active" to "Manually", you bypass the DHCP protocol. Instead, define a static IP
address for the LAN adapter in the fields next to "Static IP address".
When you set a static IP address for the LAN adapter, you make access to the
configuration web interface via the URL (http://altherma.local) impossible.
Therefore, when setting a static IP address, note it down somewhere, this for easy
future access to the configuration web interface.
The DIP switch allows you to assign a custom static IP address to the LAN adapter.
This IP address is "169.254.10.10". When you choose to do this, you bypass any IP
settings made on the configuration web interface.
To assign the custom static IP address to the LAN adapter:
1 Turn OFF the power to the LAN adapter.
2 Set DIP switch 2 to "ON".
3 Turn ON the power.
NOTICE
Use appropriate tooling to set the DIP switches to another position. Beware of
electrostatic discharge.
DHCP active Automatic Manually
Static IP address 10 . 0
Subnetmask 255 . 255
Default gateway 10 . 0
Primary DNS 10 . 0
Secondary DNS 10 . 0
Submit
9 LAN adapter
|
. 0 . 7
. . 0
255
. 0 . 1
. 0 . 1
. 0 . 1
Translation/description
DHCP active
Automatic
Manually
Static IP address
Subnetmask
Default gateway
Primary DNS
Secondary DNS
Installer reference guide
119