Daikin Altherma 3 GEO Series Installer's Reference Manual page 134

10 | Configuration
Installer reference guide
134
Item
h Main zone
h1 Installed room thermostat type:
Unit operation is decided based on the ambient temperature
of the dedicated Human Comfort Interface (BRC1HHDA used
as room thermostat).
Unit operation is decided by the external room thermostat
(wired or wireless).
— No room thermostat installed or set. Unit operation is
decided based on the leaving water temperature regardless
of the actual room temperature and/or heating demand of
the room.
h2 Installed heat emitter type:
Underfloor heating
Fancoil unit
Radiator
21
h3 Measured room temperature
45
h4 Leaving water temperature setpoint
i Holiday mode
Holiday mode active
j Additional zone
j1 Installed room thermostat type:
Unit operation is decided by the external room thermostat
(wired or wireless).
— No room thermostat installed or set. Unit operation is
decided based on the leaving water temperature regardless
of the actual room temperature and/or heating demand of
the room.
j2 Installed heat emitter type:
Underfloor heating
Fancoil unit
Radiator
18
j3 Leaving water temperature setpoint
k Malfunction
A malfunction occurred.
See
malfunction" [
(1) If the corresponding operation (for example: space heating) is not active, the circle
is greyed out.
Description
"14.4.1 To display the help text in case of a
4
222] for more information.
(1)
(1)
(1)
EGSAH/X06+10UDA9W
Daikin Altherma 3 GEO
4P598592-1A – 2019.12