Daikin Altherma 3 GEO Series Installer's Reference Manual page 179

Holiday
Quiet
EGSAH/X06+10UDA9W
Daikin Altherma 3 GEO
4P598592-1A – 2019.12
INFORMATION
By default, daylight savings time is enabled and clock format is set to 24 hours. These
settings can be changed during initial configuration or via the menu structure [7.2]:
User settings > Time/date.
About holiday mode
During your holiday, you can use the holiday mode to deviate from your normal
schedules without having to change them. While holiday mode is active, space
heating/cooling operation and domestic hot water operation will be turned off.
Room frost protection and anti-legionella operation will remain active.
Typical workflow
Using holiday mode typically consists of the following stages:
1 Setting the starting date and ending date of your holiday.
2 Activating the holiday mode.
To check if holiday mode is activated and/or running
If is displayed on the home screen, holiday mode is active.
To configure the holiday
1 Activate the holiday mode.
▪ Go to [7.3.1]: User settings > Holiday > Activation.
7.3.1
Activation
From
Till
▪ Select On.
2 Set the first day of your holiday.
▪ Go to [7.3.2]: From.
▪ Select a date.
▪ Confirm the changes.
3 Set the last day of your holiday.
▪ Go to [7.3.3]: Till.
▪ Select a date.
▪ Confirm the changes.
About quiet mode
You can use quiet mode to decrease the sound of the unit. However, this also
decreases the heating/cooling capacity of the system. There are multiple quiet
mode levels.
The installer can:
10 Configuration
|
—
—
—
Installer reference guide
179