Connecting Your Esd Wrist Strap To The Chassis - Cisco Nexus 7000 Series Hardware Installation And Reference Manual

Chapter 4 Installing a Cisco Nexus 7018 Chassis
Grounding the Cisco Nexus 7018 Chassis
S e n d d o c u m e n t c o m m e n t s t o n e x u s 7 k - d o c f e e d b a c k @ c i s c o . c o m
Figure 4-6 Grounding Pad on the Cisco Nexus 7018 Chassis
1 Grounding port
Prepare the other end of the grounding wire and connect it to an appropriate grounding point in your site
Step 5
to ensure an adequate earth ground for the switch. If the rack is grounded, connect the grounding wire
as explained in the documentation provided by the vendor for the rack.

Connecting Your ESD Wrist Strap to the Chassis

After you connect the chassis to the earth ground, you can ground your ESD wrist strap by plugging it
into the ESD port shown in Figure 4-7.
Cisco Nexus 7000 Series Hardware Installation and Reference Guide
4-14
OL-23069-06