Epld Images Needed For Vpcs - Cisco Nexus 7000 Series Hardware Installation And Reference Manual

Chapter 7 Managing the Switch Hardware
S e n d d o c u m e n t c o m m e n t s t o n e x u s 7 k - d o c f e e d b a c k @ c i s c o . c o m
If you are an existing user, enter your username in the User Name field and your password in the
Step 7
Password field. If you are a new user, click Register Now and provide the required information before
returning to the Log In page and logging in with your new username.
The Downloads page lists the software types that can be downloaded for the switch that you specified.
Click NX-OS EPLD Updates.
Step 8
The Downloads page lists software releases that you can download.
Choose Latest Releases > 6.0(1).
Step 9
The Downloads page displays image information, including a link to the downloadable Tar file, to the
right of the releases.
Click the link for the Tar file.
Step 10
The Downloads page displays a Download button and lists information for the Tar file.
Click Download.
Step 11
The Supporting Documents page opens to display the rules for downloading the software.
Read the rules and click Agree.
Step 12
A File Download dialog box opens to ask if you want to open or save the images file.
Click Save.
Step 13
The Save As dialog box appears.
Step 14 Indicate where to save the Tar file and click Save.
The Tar file saves to the location that you specified.
You are ready to prepare the EPLD images for Installation (see the
Installation" section on page

EPLD Images Needed for vPCs

The virtual port channel (vPC) feature is available beginning with Cisco NX-OS Release 4.1(3). When
you enable vPC on the chassis, you must have EPLD image 186.3 (or later image) on the 32-port
10-Gigabit Ethernet types of I/O modules (N7K-M132XP-12 and N7K-M132XP-12L).
The EPLD upgrade operation is a disruptive operation. You should execute this operation only at a
Note
programmed maintenance time. The system/kickstart ISSU upgrade is a nondisruptive upgrade.
Most of the N7K-M132XP-12 modules in the chassis already meet this minimum EPLD requirement,
but if you are working with an N7K-M132XP-12 module that was shipped before June 2008, you might
need to upgrade the EPLD version.
To determine the EPLD version for all N7K-M132XP-12 modules, enter the show version module
module_id epld. If the line FE Bridge(x) version displays a version earlier than 186.7, you should
schedule an EPLD upgrade to a version that is compatible with the target Cisco NX-OS release. For
example, if you want to run Cisco NX-OS Release 6.0(1), you should choose Release 6.0(1) EPLDs.
The following example shows Release 186.7 on the FE Bridge line, which is the correct EPLD version:
OL-23069-06
7-43).
Cisco Nexus 7000 Series Hardware Installation and Reference Guide
Configuring EPLDs
"Preparing the EPLD Images for
7-41