Cisco Nexus 7000 Series Hardware Installation And Reference Manual page 293

Chapter 9 Replacement Procedures
S e n d d o c u m e n t c o m m e n t s t o n e x u s 7 k - d o c f e e d b a c k @ c i s c o . c o m
Figure 9-41
1 Left door stopper identified with an L on
the bottom of the base.
2 Two M3x14 screws that fasten the stopper
to the left side of the cable management
assembly.
Position the right door stopper (has an R on its base) on the middle of the right side of the cable
Step 3
management frame and fasten it with two M3x14 pan-head screws as shown in
these two screws to 8.4 to 11 in-lb (0.9 to 1.2 N·m).
OL-23069-06
Replacing the Front Door and Air Intake Assemblies on the Cisco Nexus 7018 Chassis
Attaching the Left Door Stopper
Cisco Nexus 7000 Series Hardware Installation and Reference Guide
3 Screw holes on the cable management assembly.
Figure 9-42. Tighten
9-71