Cisco Nexus 7000 Series Hardware Installation And Reference Manual page 257

Chapter 9 Replacement Procedures
S e n d d o c u m e n t c o m m e n t s t o n e x u s 7 k - d o c f e e d b a c k @ c i s c o . c o m
Figure 9-14
1 Open the box.
2 Place the foam padding on the bottom.
3
Place the foam padding with the middle cut
out on top of the foam padding in the box.
4
Place the trifold piece of cardboard inside the
hole in the foam padding.
5
Put the fabric module in an ESD bag (not
shown) and then place the bagged module in
the hole of the padding.
OL-23069-06
Packing a Cisco Nexus 7010 Fabric Module (N7K-C7010-FAB-1)
Cisco Nexus 7000 Series Hardware Installation and Reference Guide
Replacing a Cisco Nexus 7010 or 7018 Fabric Module During Operations
6 Place the foam padding on top of the module.
7 Fold the narrow flaps over the top of the box.
8
Fold the wide flaps over the top of the box.
9
Tape the wide flaps together and to the box.
9-35