Cisco Nexus 7000 Series Hardware Installation And Reference Manual page 365

Appendix E Repacking the Cisco Nexus 7000 Series Switch for Shipment
S e n d d o c u m e n t c o m m e n t s t o n e x u s 7 k - d o c f e e d b a c k @ c i s c o . c o m
Figure E-2
1 Lower pallet
2
Raised portion of the pallet
3 Mounting brackets (two shown and two
hidden on the other side of the chassis)
Align the screw holes in the side of the chassis with the screw holes in the vertical sides of the two angle
Step 17
brackets. Fasten the two angle brackets to the chassis by securely tightening the four screws for each
bracket. See
Attach two more angle brackets to the pallet on the other side of the chassis. Make sure that the four
Step 18
screw holes on the vertical side of each bracket align with four holes in the chassis.
Use four screws to securely attach each of the additional two brackets to the chassis.
Step 19
Step 20 Securely fasten the two bolts on each of the four angle brackets to the pallet.
Step 21 Place the packing bag over the chassis.
OL-23069-06
Attaching the Chassis to the Shipping Pallet
Figure E-2.
Cisco Nexus 7000 Series Hardware Installation and Reference Guide
Repacking the System Components
4 Bolts holding brackets to the upper pallet
5
Screws holding the chassis to the brackets
E-9