Cisco Nexus 7000 Series Hardware Installation And Reference Manual page 276

Replacing the Cable Management Frame on the Cisco Nexus 7018 Chassis
S e n d d o c u m e n t c o m m e n t s t o n e x u s 7 k - d o c f e e d b a c k @ c i s c o . c o m
Figure 9-26
1
Rack-mount bracket.
2 Upper cable management assembly.
For the lower cable management assembly on the left, loosen and remove four M4x10 screws, and then
Step 5
lift off the assembly as shown in
Cisco Nexus 7000 Series Hardware Installation and Reference Guide
9-54
Removing an Upper-Cable-Management Assembly
Figure 9-27.
Chapter 9
3
Loosen and remove five M4x10 screws.
4 Lift the upper cable management assembly off
the rack-mount bracket hooks.
Replacement Procedures
OL-23069-06