Default Color Versus Custom Color - IBM TS7600 with ProtecTIER Software Upgrade Manual

7. When you are finished making changes in the Appearance tab, click Ok.
You are returned to the ProtecTIER Manager window.
8. Exit and restart ProtecTIER Manager (as described in step 4 on page 103) so the
color palette changes take effect.
After you log in to ProtecTIER Manager and add a node, the display reflects
your custom color selections.
An example of the default color versus a custom color for Allocable resources,
is shown in: Figure 22
Figure 22. Default color versus custom color
9. Proceed as appropriate. Return to the task from which you were sent to these
instructions or resume your regular use of ProtecTIER Manager.
Accessibility for publications and ProtecTIER Manager
105