Procedure
1. Open the ProtecTIER Configuration Menu. To do so:
a. At the sever login prompt, type: ptconfig and press <enter>.
b. At the Password prompt, type: ptconfig and press <enter>
The ProtecTIER Configuration Menu displays:
ProtecTIER Configuration Menu:
1. Update Time, Date, Timezone & Timeserver(s)
2. Update System Name
3. Update Customer Network
5. Activate/Deactivate Replication Manager
6. Update Replication Network
7. Configure Static Routes
8. Configure Application Interfaces
9. Restore Network Configuration
q. Quit
Please choose an option:
Figure 4. ProtecTIER Configuration Menu
Note: Menu option 4 has been purposely omitted from the menu. In
addition, option 8, Configure Application Interfaces, is not applicable for
VTL systems. This option is valid only for systems configured to use
OpenStorage with NetBackup.
2. Select option 1, Update Time, Date, Timezone & Timeserver(s). Type: 1 and
press <enter>.
The Date, Time, Timezone & Timeserver(s) configuration menu, displays:
Figure 5. Date, Time, Timezone and Timeserver(s) configuration menu
3. Select option 2, Set Timezone. Type: 2 and press <enter>.
4. If you are located in the United States, when prompted for a country code,
type: US and press <enter>.
Appendix A. Changing the system date and time
41