User Name And Password For System Initialization; Default User Name And Password For The - IBM Storwize V5000 Quick Installation Manual

User name and password for system initialization

During the initialization procedure, you need to log in to the initialization GUI for
the system.
The default user name and password for the initialization GUI are listed in the
following table.
Note: The 0 character in the password is the number zero, not the letter O.
32
Storwize V5000: Quick Installation Guide
a. Open Internet Explorer.
b. Select Tools > Internet Options.
c. Select the Advanced tab.
d. Scroll to the Security section.
e. Check the Use TLS 1.1 and Use TLS 1.2 checkboxes.
Note: IE 11 and later and Microsoft Edge enable TLS 1.1/1.2 by default.
Table 8. Default user name and password for the initialization GUI
User name
superuser
Password
passw0rd