Customizing The Color Palette; Color Selection, Swatches Tab - IBM TS7600 with ProtecTIER Software Upgrade Manual

Customizing the color palette

About this task
Use this procedure to customize the color palette for ProtecTIER Manager to
improve visibility in the display, or to suit your personal preferences.
Procedure
1. If necessary, start ProtecTIER Manager as described in step 1 on page 101.
2. Open the Preferences dialog box, as described in 2 on page 102.
3. Scroll down (if necessary) to see the entire Color selection list, and then select
Figure 21. Color selection, Swatches tab
4. Select a new color from the color palette.
5. When you have finished selecting or specifying the new color, click Ok.
6. To change another color, repeat steps 3 through 5.
104
IBM System Storage TS7600 with ProtecTIER: Software Upgrade Guide
the color you want to change.
The Color selection dialog box opens, with the Swatches tab selected, as
shown in Figure 21:
The color that is currently defined for your selection is shown in the Preview
pane.
i
You can also specify a new color by using the Hue/Saturation/Brightness
(HSB) or Red/Green/Blue (RGB) color models. To do so, click the tab for the
model you want to use and enter the required values.
You are returned to the Appearance tab.