Factory-Default Server Ip Addresses For A Stand-Alone Vtl Protectier Server (3958 Dd4 Or 3958 Ap1); Factory-Default Server Ip Addresses For A Stand-Alone Openstorage Protectier Server (3958 Dd4 Or 3958 Ap1) - IBM TS7600 with ProtecTIER Software Upgrade Manual

Attention:
1. All components use subnet mask 255.255.255.0.
2. Do not configure the replication ports on the same subnet as the external LAN
Factory-default IP addresses for a stand-alone VTL configuration
for a TS7650G 3958 DD4 or TS7650 Appliance
Table 6. Factory-default server IP addresses for a stand-alone VTL ProtecTIER server (3958 DD4 or 3958 AP1)
Stand-alone TS7650 VTL
configuration
Node A (the server located in the
lower part of the rack)
Factory-default IP addresses for a stand-alone OpenStorage
configuration for a TS7650G 3958 DD4 or TS7650 Appliance
Table 7. Factory-default server IP addresses for a stand-alone OpenStorage ProtecTIER server (3958 DD4 or 3958
AP1)
Stand-alone TS7650
OpenStorage configuration
Node A (the server located
in the lower part of the
rack)
62
IBM System Storage TS7600 with ProtecTIER: Software Upgrade Guide
port Eth0. Doing so may cause replication errors.
Component
Server A
Server A
Server A
Server A
Server A
Server A
Component Port
Server A eth0
Server A eth1
Server A eth2
Server A eth3
Server A eth4
Server A eth5
Server A eth6
Server A eth7
Server A eth8
Server A eth9
Server A eth10
Server A eth11
Server A eth12
Server A eth13
Port Function
eth0 Customer local
LAN
eth1 Cluster network 1
eth2 Replication network
1
eth3 RAS
eth4 Cluster network 2
eth5 Replication network
2
Function
Customer local LAN
Cluster network 1
Free
RAS
OpenStorage
OpenStorage
OpenStorage
Replication 1
OpenStorage
OpenStorage
OpenStorage
Replication network 2
Cluster network 2
Free
Factory Default IP
Address
192.168.10.161
N/A
192.168.20.1
172.31.1.xx
N/A
192.168.21.1
Factory Default IP Address
192.168.10.161
N/A
N/A
172.31.1.xx
192.168.150.1
192.168.151.1
192.168.152.1
192.168.20.1
192.168.153.1
192.168.154.1
192.168.155.1
192.168.21.1
N/A
N/A