Customer And Replication Ip Addresses For Vtl Or Openstorage Systems - IBM TS7600 with ProtecTIER Software Upgrade Manual

Customer and Replication IP addresses
Table 11. Customer and Replication IP addresses for VTL or OpenStorage systems
Default gateways for eth2 and eth5 for VTL systems or eth5 or eth13 for OpenStorage systems should be different,
otherwise the vlans are meaningless.
For VTL systems, provide a routing path from the IP address on eth2-server1 to the IP address of eth2-server2, and
a routing path from the IP address on eth5-server1 to the IP address of eth5-server2. For OpenStorage systems,
provide a routing path from the IP address on eth5-server1 to the IP address of eth5-server2, and a routing path
from the IP address on eth13-server1 to the IP address of eth13-server2.
Node A (the
Port
server located in
eth2 for VTL
the lower part of
systems or eth5
the rack)
for OpenStorage
systems
eth5 for VTL
systems or eth13
for OpenStorage
systems
Node B (the Port
server located in
eth2 for VTL
the upper part of
systems or eth5
the rack)
for OpenStorage
systems
eth5 for VTL
systems or eth13
for OpenStorage
systems
Node A (the
Port
server located in
eth2 for VTL
the lower part of
systems or eth5
the rack)
for OpenStorage
systems
eth5 for VTL
systems or eth13
for OpenStorage
systems
Node B (the Port
server located in
eth2 for VTL
the upper part of
systems or eth5
the rack)
for OpenStorage
systems
eth5 for VTL
systems or eth13
for OpenStorage
systems
66
IBM System Storage TS7600 with ProtecTIER: Software Upgrade Guide
Source Site
IP Address Network Mask
IP Address Network Mask
Destination or Target Site
IP Address Network Mask
IP Address Network Mask
Default Gateway Dedicated VLAN
Default Gateway Dedicated VLAN
Default Gateway Dedicated VLAN
Default Gateway Dedicated VLAN