Step 19. Change Default Passwords - IBM Storwize V7000 Unified Quick Installation Manual

10. Select OK, then Finish, then Close to complete the process. The file modules
Schedule a periodic backup of the TDB:
The Trivial DataBase (TDB) is used to store various types of information used to
manage the system. It is recommended that you set up a periodic backup of the
TDB, so backups are available to support personnel, in the event a TDB becomes
lost or corrupted.
1. ssh to the file module management IP address (refer to Table 4 on page 14). Log
2. Type mktask BackupTDB --minute 0 --hour 2 --dayOfWeek "*"
3.
4. Exit the ssh session.

Step 19. Change default passwords

Use the ssh connection to set the superuser, root, and admin passwords.
68
Storwize V7000 Unified: Quick Installation Guide
5. If multiple entries from the Domain Name Service (DNS) are needed, enter
one address then hit the + (plus) to add more.
6. Select Edit to indicate how the system authenticates users. Use table Table 9
on page 22 to work through the authentication strategy outlined in the tables.
7. Review the hardware image and verify that it reflects your configuration.
Refer to the onscreen instructions and take the recommended actions if
necessary.
Note: Depending on your server placement in the frame, the rack locations
may not match.
8. It is recommended that you select yes to automatically configure the storage.
You can choose to skip this step by selecting Next and configure the storage
using the GUI at a later time.
Note: You have to configure the storage before using the system.
9. At the Public Networks window select the New Network button to add one
or more public network addresses. Refer to Table 5 on page 17 for information
to set up the public network information.
v The Subnet is entered as the subnet address followed by the CIDR
equivalent of the subnet mask (for example 9.11.100.100/32).
v The Interface drop down menu specifies the network interface (for example,
ethX1) to use for attaching the network. It is important to make a selection.
If you leave the selection as Not Attached you are unable to attach new
public addresses to the network
reboot. Allow 15 minutes for the system to come back up before continuing.
in with user ID admin and password admin.
Note: If you are prompted with following message, the management service is
probably not up from the reboot. Wait a few minutes and try again:
IBM SONAS management service is stopped
EFSSG0026I Cannot execute commands because Management Service is stopped.
Use startmgtsrv to restart the service
The previous command schedules a backup of the Trivial DataBase at 2:00 a.m.
every day. If you want to schedule the backup at a different time, change the
number following the hour parameter. The 2 in the command can range from 0
(midnight) to 23 (11 p.m.).
Press Enter.