Using The Protectier Configuration Menu - IBM TS7600 with ProtecTIER Software Upgrade Manual

12. Confirm and save your changes to the configuration by typing c <Enter> in
Reviewing the results
Note: If only the date was modified, and not the timezones and/or timeservers,
only the date will be displayed in the contents.
For example: if you modified the date, added a primary and secondary time
server, and specified America/Chicago as the time zone, when you choose c to
commit the changes and exit, the file contents appear as follows:
Please review the following information:
========================================
Date: Mon Nov 9 14:51:34 2009
Primary time server: 192.168.10.11
Secondary time server: 192.168.15.11
Timezone: America/Chicago
Do you wish to apply those settings? (yes|no)
Type y to save and apply the changes.
Note: the cluster & VTFD services on all nodes must be stopped in order to
continue. Do you wish to continue? (yes|no)
Type y to stop and restart the cluster and VTFD services on all the nodes.
Stopping Cluster Services
Stopping NTPD
Setting Time Zone
Setting Timeserver
Setting Date & Time
Starting NTPD
Starting cluster
Cluster Started

Using the ProtecTIER Configuration Menu

About this task
The following procedures apply only to TS7650 Appliance systems.
40
IBM System Storage TS7600 with ProtecTIER: Software Upgrade Guide
Type the secondary timeserver's IP address. For example: 192.168.12.15
<Enter>
The following is displayed:
Date, Time, Timezone & Timeserver(s) configuration
==================================================
1. Set date & time
2. Set Timezone
3. Set Timeserver(s)
c. Commit changes and exit *
q. Exit without committing changes
Please Choose:
the Please Choose: field. A list of the configuration changes is displayed for
review.
Customer Task
[ Done ]
[ Done ]
[ Done ]
[ Done ]
[ Done ]
[ Done ]
[ Done ]