IBM TS7600 with ProtecTIER Software Upgrade Manual page 44

10. From the menu, select the Display version information option. Type the
11. Repeat steps 4 on page 29 through 9 on any other applicable servers.
12. The update procedure is now complete.
30
IBM System Storage TS7600 with ProtecTIER: Software Upgrade Guide
6. Press Enter. The following is displayed:
Copying files...
Copied.... 100% Done
Please remove the disc from the drive, and press Enter to continue.
7. The progress is displayed until it reaches 100%, as shown in the example
above. Once the operation is done, follow the instructions and remove the disc
from the CD-ROM drive. Press Enter to continue. The code update begins.
8. When the upgrade is complete, you are prompted to reboot the server. Press
Enter.
When the reboot completes, the login: prompt displays.
9. (optional) Verify the component versions on the server. Access the ProtecTIER
Configuration menu.
At the login prompt, type: ptconfig and press Enter.
At the Password prompt, type: ptconfig and press Enter. The ProtecTIER
Service Menu is displayed.
number of your choice and press Enter at the prompt.
The ProtecTIER version is provided in the first line of output, in the first three
digits after the colon. The version information looks similar to the following:
PT version : 3.1.1