Removal Of The Power Supply Unit (Pu1) - Konica Minolta Di1611 Service Manual

Di1611/Di2011 FIELD SERVICE Ver.1.0 Mar. 2004
(4)

Removal of the Power Supply Unit (PU1)

1. Remove the Left Cover, Rear Cover, and Upper Rear Cover.
☞ 1-25
2. Remove the Master Board.
3. Remove the Control Board.
☞ 1-29
4. Remove the harness from four wiring saddles
and one edge cover.
5. Remove four screws and protective cover 1.
4035D522AA
6. Remove eight screws and protective cover 2.
4035D056AB
7. Unplug all connectors from the Power Supply
Unit.
4035D057AB
8. Remove six screws and the Power Supply Unit.
4035D523AA
1-31
MAINTENANCE