Misfeed At The Fusing/Exit Section - Konica Minolta Di1611 Service Manual

TROUBLESHOOTING
2.5.6

Misfeed at the Fusing/Exit Section

<Detection Timing>
Type
Fusing/exit sec- • The Exit Paper Sensor (PC3) is not unblocked even after the lapse of
tion misfeed a given period of time after the Synchronizing Roller Sensor (PC1) has
detection been blocked.
Paper left at the • The Exit Paper Sensor (PC3) is blocked at timing when the Power
fusing/exit sec- Switch is turned ON, the cover is opened and closed, or a paper mis-
tion feed or malfunction is reset.
<Action>
Synchronizing Roller Sensor (PC1)
Exit Paper Sensor
Step Operations
1 Initial checks
2 PC1 sensor check
3 PC3 sensor check
4 Replace PWB-A
Di1611/Di2011 FIELD SERVICE Ver.1.0 Mar. 2004
Description
Relevant Electrical Components
Master Board (PWB-A)
Ref. Page
–
☞ 3-1
☞ 3-1
–
3-12
WIRING DIAGRAM
Control signal
–
PWB-A PJ17A-3 (ON)
PWB-A PJ15A-3 (ON)
–
Location
(Electrical
Components)
–
F-8
B-4
–